United States (US) dollar
ADB Safety Engineered 10,000 lb. Black Oxide Hoist Ring, 23108
$225.00
- Material:High strength 4140 alloy steel
- Design Factor:5:1, Magnetic Particle Inspected Per ASTM E1444, Hoist Rings retain the same rated load from 0 to 90 degrees from the bolt axis, Standard tolerance +- .030 inch unless otherwise specified.
- Finish:Black Oxide Finish for corrosion resistance, Also available in Cadmium, Titanium-Cadmium, Nickel and other plating.
- Range of Movement:Swivel 360°, Pivot 180° Under Load
- 200% Proof Load Tested
Description
The ADB Safety Engineered Hoist Ring (Part #23108) is a heavy-duty lifting component designed to support a 10,000 lb. working load limit (WLL) while providing 360° swivel and 180° pivot movement under load.
Key Specifications
According to data from Lifting.com and Raptor Supplies, the following specifications apply to this specific model:
- Working Load Limit (WLL): 10,000 lbs.
- Thread Size: 1-1/8″-8.
- Thread Projection: 2.29 inches.
- Installation Torque: 230 ft-lbs.
- Safety Factor: 5:1 design factor in any direction.
- Material: High-strength 4140 forged alloy steel.
- Finish: Black oxide for corrosion resistance.
Performance Features
Manufacturers and industrial suppliers highlight several critical safety and performance features for the ADB Hoist Ring (23108):
- Full Range of Motion: It maintains its full rated load from 0 to 90 degrees from the bolt axis, swiveling 360° and pivoting 180° to compensate for pitch, roll, and sway during unbalanced lifts.
- Rigorous Testing: Each unit is 200% proof load tested and magnetic particle inspected per ASTM E1444.
- Standards Compliance: This hoist ring meets the manufacturing and design requirements of ASME B30.26 and MIL-STD 209.
- Traceability: Each unit is individually serial numbered for identification and tracking.
Safety and Installation
Proper usage is critical for maintaining load integrity:
- Surface Contact: The bushing must be in full contact with the mounting surface; never use washers or spacers between the bushing and the object.
- Mating Material: ADB recommends the mating material have a minimum tensile strength of 80,000 psi.
- Visual Inspection: Users should visually inspect for damage and verify the torque value before every use.
Reviews
There are no reviews yet.